Multi-cut edm machine

edm wire cutting machine

Model	LRT-280	LRT-320	LRT-400	LRT-500	LRT-630		LRT-800
Table size(mm)	410×540	440×620	510×730	630×880	780×1080		1000×1360
X,Y axis travel(mm)	280×360	320×400	400×500	500×630	630×800		800×1000
Max.cut thickness(mm)	300	300	300	400	500		600
U,V axis travel(mm)	Normal:24×24 Large taper:D-60×60 E-130×130 T-240×240
Wire diameter range(mm)	Molybdenum wire:Φ0.10 to 0.22
Wire feed rate(m/sec)	12,9,7,5,2
Taper angle(°)/workpiece thickness	Max. multi-cut:±1.5°/50mm Max. one-cut: ±3° D-±10° E-±18° T-±30°/50mm
Process accuracy(mm)(Vertical)	Multi-cut:10×10×30 Square≤0.006 Octagon≤0.009 Straightness≤0.006 One-cut≤0.012
Process roughness(Ra.um)	Multi-cut:Ra≤1.2 (Micro-pulse power Ra≤0.8) One-cut:Ra≤2.5
Motor drive system(axis)	Stepping motor or AC servo motor(option)
Screws&Guides(X,Y)	Precision ball screws/Linear motion guides
Wire tension	3 Grade(0/1/2) manual adjust
Dielectric coolant	Complex or water-dissolve special coolant/65L
Power supply	AC380V/2.5KVA
Max.table carry(kg)	300	450	600	1000		1500	2000
Net wt. of machine body(kg)	1300	1500	1700	2600		4300	6800
Outside dimension of machine	1400×1000×1750	1500×1200×1750	1600×1400×1750	1930×1660×2080		2000×1880×2180	2380×2360×2280

Acura